Pamela Howard's blog

Control Ncstudio V5.5.60-1 ENGLISH Setup 64 Bit !!EXCLUSIVE!!

Pamela Howard's photo
Pamela Howard
·

3 min read

Control Ncstudio V5.5.60-1 ENGLISH Setup 64 Bit

Control Ncstudio V5.5.60-1 ENGLISH Setup 64 Bit !!EXCLUSIVE!!

Link 1

Link 2

Link 3

How to Install and Use Weihong Ncstudio Machine Vision Controller V5.5.60 ENGLISH Setup 64 Bit

Weihong Ncstudio Machine Vision Controller V5.5.60 ENGLISH Setup 64 Bit is a software that allows you to control CNC routers with a PCI bus interface and a motion control card. It supports functions such as advance start, breakpoint resume, MPG wizard, reverse cutting, and CCD auto positioning. It can also handle various file formats such as G code, PLT, DXF, and ENG. In this article, we will show you how to install and use this software on your computer.

Installation Steps

  1. Download the software from the official website of STYLECNC or from the link provided by your CNC router supplier.

  2. Extract the zip file and run the setup.exe file as administrator.

  3. Follow the instructions on the screen and choose the language, destination folder, and components to install.

  4. After the installation is complete, restart your computer.

  5. Insert the motion control card into a PCI slot on your computer and connect it to your CNC router with a servo cable.

  6. Run the Ncstudio.exe file from the installation folder or from the desktop shortcut.

  7. Activate the software with the serial number provided by your supplier or by STYLECNC.

Usage Steps

  1. Open the Ncstudio software and click on the "File" menu to load a CNC file that you want to process. You can also create a new file or edit an existing one with the built-in editor.

  2. Click on the "View" menu to switch between different views such as 2D, 3D, simulation, or operation mode.

  3. Click on the "Parameter" menu to set up various parameters such as spindle speed, feed rate, backlash compensation, lead screw compensation, etc.

  4. Click on the "Tool" menu to select a tool or create a new one with the tool library.

  5. Click on the "Origin" menu to set up the origin point of your CNC router. You can use manual input, manual pulse generator, or CCD auto positioning methods.

  6. Click on the "Start" button to start processing your CNC file. You can also use the external start/stop buttons or manual feed switches on your CNC router.

  7. Monitor the progress of your CNC file on the screen and adjust the feed rate or spindle speed if needed.

  8. Click on the "Stop" button to stop processing your CNC file. You can also use the external start/stop buttons or manual feed switches on your CNC router.

Tips and Tricks

  • You can use the "Look ahead" function to improve the machining quality by predicting the next movement of your CNC router.

  • You can use the "Reverse cutting" function to cut in reverse direction if you encounter any errors or problems during processing.

  • You can use the "Breakpoint resume" function to resume processing from a specific point if you have to pause or interrupt your CNC file.

  • You can use the "MPG wizard" function to control your CNC router with a manual pulse generator for fine tuning or debugging purposes.

12c6fc517c